Oki B 4100 Maintenance Manual page 116

Note1: RESOLUTION & ORIGINAL of Tx mode defult setting can be selected by using
STD / NORMAL
EX. FINE / NORMAL
EX. FINE / DARK
Note2: When the service bit is set to "off" and the corresponding bit of XPARA of national code is set to "off",
Rev. 3 Ring response and/or Distinctive ring is bypassesd as follows:
Note3: When 2'nd tray is not mounted on OKIFAX 5000 series, 2'nd paper size is bypassed as follows:
Rev. 3
Note4: When CTR board is not mounted on OKIOFFICE44/OKIFAX 4100/5000 series, PC/FAX switch is
Rev. 3 bypassed as follows:
40055101TH Rev.4
STD / DARK
EX.FINE / LIGHT
(bypass)
11:RING RESPONSE
[ X ] YES( ) NO( )
(bypass)
12:DISTINCTIVE RING
[ X ] YES( ) NO( )
(bypass)
22:PC/FAX SWITCH
[ X ] YES( ) NO( )
23:ONE TOUCH PARAM
[ X ] YES( ) NO( )
(bypass)
22:PC/FAX SWITCH
[ X ] YES( ) NO( )
23:ONE TOUCH PARAM
[ X ] YES( ) NO( )
STD / LIGHT
FINE / LIGHT
PHOTO / NORMAL
PHOTO / LIGHT
key.
FINE / NORMAL
FINE / DARK
PHOTO / DARK
116 /