Tone Send Test - Oki B 4100 Maintenance Manual

6.8

Tone Send Test

1. Purpose
To send the G3 tonal frequencies to the line.
2. Procedure
Operations:
To bring the LCD up to the desired message,
press SELECT FUNCTION key once, COPY
key twice and
message in memory)
Enter "4".
Press key.
After the checking, press STOP key or end
of the transmission.
*1: When indicating "2100Hz or 1100Hz SENDING", extend the tone send test for
30 more seconds by pressing the START key.
40055101TH Rev.4
key twice. (In case of no
The display shows:
1:SELF DIAGNOSIS
YES( ) NO( /1-8)
4
4:TONE SEND TEST
YES( ) NO( /1-8)
CML relay on
*1
4:TONE SEND TEST
2100HZ SENDING
*1
4:TONE SEND TEST
1100HZ SENDING
CML relay off
(5 seconds)
(5 seconds)
221 /