Oki B 4100 Maintenance Manual page 80

T.F.
Item
No.
01 Service bit
Rev.3
02 Line monitor control
03 Country code
Rev.2
04 Time and date print
05 TSI print
40055101TH Rev.4
Table 2.9.1 (1/6) Service Personnel Initial Settings
Switching serviceman/user operation.
ON :
OFF :
To enable or disable the following functions:
• Drum (Total, Print, Scan), and toner counter clear
• Protocol dump
• Dial parameters
• etc
Changing the audible monitoring range.
FP +06 (To select the loudness of monitoring)
ON :
OFF :
Note:
Selecting the following country code:
USA, INT'L, GBR, IRL, NOR, SWE, FIN, DEN,
GER, HUN, TCH, POL, SUI, AUT, BEL, HOL,
FRE, ESP, ITA, GRE, AUS, NZL, SIN, HNG
Enables or disables the function of printing local date
and time at the top of the received page.
OFF/ ONCE/ALL selectable.
Note:
Switches the function of printing TSI data from
remote fax onto the received pages. TSI is printed at
the leading edge of first reproduced copy. (Set at
receiver.)
When TF04 is set to "ALL", TSI is printed for the all
received pages.
ON :
OFF :
(Reference)
TSI; Transmitting Subscriber Identification
Specifications
Service personnel's features are available.
Service personnel's features are not avail-
able.
Enable
Disable
In case of transmission mode, the monitor
will be available during dialling, but the
monitor will be switched off automatically
after the elapse of specified time (about 5
sec.). However, when TF02 is set to ON,
the monitor is available during communi-
cation also.
• Set at receiver.
Enable
Disable
Default
80 /