Oki B 4100 Maintenance Manual page 100

No. Item
11 Manual loading feeder
Rev. 3
12 Broadcast
(Memory transmission)
13 Delayed transmission from the
memory
14 Polling transmission
(To be polled)
15 Polling reception
16 Transmission preparation (Hopper)
40055101TH Rev.4
Table 2.9.3 (3/6) User's Functions
For OKIFAX 5000 series: One single sheet from the feeder above
the first recording paper cassette can be copied.
For OKIOFFICE44/OKIFAX4100: One single sheet from the
feeder below the paper exit can be copied.
Example of sheets: Transparency for an overhead projector
Max. 56 (OKIOFFICE44/OKIFAX 4100), Max. 84 (OKIFAX
5200/5300) and Max. 134 (OKIFAX 5500/5600) remote locations
can be specified by the following means:
• One-touch keys (with of without a group list).
• Two-digit auto dial codes.
• 1 keypad dial number for OKIOFFICE44/OKIFAX 4100
• 5 keypad dial number OKIFAX 5000 series
One delayed time of calling for this feature can be specified unless
any other delayed calling feature has been specified.
The combination of 1 delayed broadcast for OKIOFFICE44/
OKIFAX 4100, 5 delayed broadcast for OKIFAX 5200/5300, 20
delayed broadcast for OKIFAX 5500/5600 and one immediate
calling of broadcast is possible.
However, the setting of delayed transmission and delayed broad-
cast must not exceed the total number of specified time which is
different according to the machine.
For example in case of OKIFAX 5200/5300 (5 specified times):
2 specified time of delayed broadcast and 3 specified time of
delayed transmission.
When multiple locations are specified for one broadcast
(1) The OKIOFFICE44/OKIFAX 4100/5000 series prints a broad-
cast entry report, if specified in operating sequence.
(2) The OKIOFFICE44/OKIFAX 4100/5000 series can print a
broadcast confirmation report. (FP + 02 To enable or disable
this printout)
The fax can automatically transmit documents at one specified time
for OKIOFFICE44/OKIFAX 4100 and five specified times for
OKIFAX 5000 series from the memory.
Document(s) placed on the feeder can be collected by a remote
station.
The fax can collect documents from one remote station.
An operator can prepare documents for transmission even while the
fax is enagaged in message reception. They will be automatically
transmitted upon completion of the reception.
An operator can also prepare documents for transmission during
transmission from memory.
Specifications
100 /