Oki B 4100 Maintenance Manual page 81

T.F.
Item
No.
06 No-toner memory reception
07 TAD mode
(For external telephone answering de-
vice.)
08 Real time dialing
09 TEL/FAX switching
40055101TH Rev.4
Table 2.9.1 (2/6) Service Personnel Initial Settings
Enables or disables the memory reception when the
fax is in no toner condition.
ON :
OFF :
Switches an automatic voice message response to the
calling station.
TAD mode is of two types (TYPE1/TYPE2).
OFF/TYPE1/TYPE2 selectable.
TYPE1 means:
1. RING comes.
2. The TAD answers, returns the recorded voice
message in TAD to calling party.
3. The FAX machine will continue to detect CNG
signal while TAD works.
4. If the FAX machine detects CNG signal, the fax
will go into normal receiving mode.
5. Even though the fax does not detect CNG signal,
the fax will go to receiving mode in hook-on
condition.
TYPE2 means:
The function from No. 1 to No. 4 of upper TYPE2 are
the same as TYPE1.
5. If the fax does not detect CNG signal during
working of TAD, the machine will go to standby
mode.
Enables or disables the real time dialling.
3 types selectable. (OFF/TYPE1/TYPE2)
TYPE1: Real-time dialling is available when the
TYPE2: Real-time dialling is available when the
Enables or disables the TEl/FAX automatic switch-
ing.
ON :
OFF :
(Related item: FP10, TF23)
Specifications
The messages are printed when toner has
been newly supplied or an operator per-
forms the memory operation (OT10).
The messages are printed in the print mode.
But print quality is not guaranteed.
optional telephone handset is OFF-HOOK.
optional telephone handset is OFF-HOOK
or HOOK key is pressed.
Enable
Disable
Default
81 /