Oki B 4100 Maintenance Manual page 187

g) First, open the Main Cover from
the front side, and then, remove
the Main Cover by removing the
nails at both sides on the rear side.
2) Separation Plate
a) Remove the Separation Plate by
removing the two screws 4.
3) NCU Board, MODEM Board
a) Remove the NCU Board by re-
moving the two screws 5.
b) Remove the MODEM Board by
removing the screw 6.
• OKIFAX 5500/5600:
• OKIFAX 5200/5300:
(2) Reassembly procedure
Reverse the disassembly procedures.
40055101TH Rev.4
Nail (at both sides)
Screw 5
28.8 kbps board
normally mounted.
14.4 kbps board
normally mounted.
(FX-050VP-C4-006)
Modem PCB
Screw 5
NCU PCB
Screw 5
Main Cover
(FX-050VP-C4-005)
Separation Plate
Screw 4
(FX-050VP-C4-007)
187 /