Oki B 4100 Maintenance Manual page 109

2)-2 Function Program
P.F.
Item
No.
01 Message confirmation report
(Single location)
02 Message confirmation report
(Multiple locations)
03 Error report (MCF)
04 Image in MCF
Rev.3
05 Sender ID
06 Line monitor volume
07 Buzzer volume
40055101TH Rev.4
Table 2.9.4 (1/4) User's Initial Settings (Function Program)
Enables or disables the automatic message confirma-
tion report printing after a single location call.
ON:
OFF: Disables this function.
Enables or disables the automatic message confirma-
tion report printing after a multiple polling or broad-
cast.
ON:
OFF: Disables this function.
Enables or disables the automatic error report print-
ing when transmission error occurs.
(Excepts for service bit "0".)
ON:
OFF: Disables this function.
Enables or disables the automatic printing of the
image on the first sheet below the message confirma-
tion report.
ON:
transmission and if the report is printed automati-
cally.)
OFF: Disables this function.
The fax can transmit programmed alphanumeric
message, such as company's name consisting of up to
32 characters.
Enables or disables the sender ID function.
*
ON:
OFF: Disables
Controls the volume.
OFF/Low/High selectable.
Selects the sound volume of each buzzer (end of
communication buzzer, voice request buzzer and off-
hook alarm) and software ringer from high, low and
middle levels.
Low/Mid/High selectable.
Note:
Specifications
Printing the MCF report.
Prints the MCF report.
Printing the error report.
Printing the image in MCF report. (Memory
(Outside only)
Enables
Fixed a low level for key touch tone.
Default
109 /