4.2.3.3 Control Panel Assembly, Paper Guide (U) Assembly.
(1) Disassembly procedure
1)
Control Panel Assembly and Pa-
per Guide (U) Assembly
a)
b)
c)
d)
2)
Control Panel Assembly
a)
b)
Disassembly
First, carry out the
disassembly procedure
up to the point of the
4.2.3.2 (Main Cover, NCU
Cover and Rear Cover).
Remove the ground cable
by removing the screw 1.
Disconnect the connector
of the Control Panel from
the MCNT Board.
The removal of the two
screws 2 results into two
separate assemblies:
Control Panel Assembly
and Paper Guide (U)
Assembly.
Remove the OPE Board
by removing the 10 small
screws 3 and the part of
the fixing hooks (8).
Remove the part of LED
by removing the two
screws 4.
Control Panel
Assembly
Ground cable
Connector
4 - 10
Service Manual, P/N 59278301
Screw 2
Paper Guide U
Assembly
(FX-050VP-C4-008)
Screw 3 (10)
Fixing hooks (8)
(FX-050VP-C4-009)
Screw 4
Part of LED
(FX-050VP-C4-010)
OKIFAX 5300/5600