Resist Roller, Hopping Roller, Sensor Plates - Oki B 4100 Maintenance Manual

4.2.3.7 Resist Roller, Hopping Roller, Sensor Plates

(1) Disassembly procedure
1) Resist Roller, Hopping Roller
a) First, carry out the disassembly
procedure up to the point of the
Lower Base removal.
(Refer to sub-item 4.2.3.6.)
b) Remove the One-way Clutch
Gear.
c) Press the Resist Roller to the right
side and lift up the left side of it,
then take off the Resist Roller.
d) Remove the One-way Clutch
Gear and Bearing.
e) Remove the Hopping Roller by
sliding to the right side.
2) Sensor Plates (Inlet, Outlet), Toner Sen-
sor
a) After removing the Lower Base,
remove the Sensor Plate by press-
ing and holding the latches while
shifting the Sensor Plate up and
out.
40055101TH Rev.4
Resist Roller
One-way Clutch Gear
Hopping Roller
Bearing
One-way Clutch Gear
(FX050-C4-028)
Sensor Plate
Sensor Plate (Inlet)
(FX050-C4-027)
(Outlet)
(FX050-C4-029)
196 /