Dial Parameters Settings - Oki B 4100 Maintenance Manual

2.9.9 Dial Parameters Settings

(1) Procedure
The following shows the case in which the service bit is on.
To bring the LCD up to the desired message,
press SELECT FUNCTION key once and
one-touch key No. 9 in the standby mode.
(In case of no message in memory)
Enter 2 using the ten-key pad.
Press
40055101TH Rev.4
Operations:
key.
The display shows:
SELECT FUNCTION (OT)
MEMORY AVAIL.=100%
Press OT9
1:FUNC. PROGRAMMING
YES( ) NO( /1-6)
2
2:DIAL PARAMETER
YES( ) NO( /1-6)
To DIAL PARAMETERS
*1 OKIOFFICE44/OKIFAX 4100 :NO (
OKIFAX 5200/5300
OKIFAX 5500/5600
*2 Not all of the following
dial parameters are released to the users
(depending on National codes
and if the Service bit is OFF)
*1
*1
)
:NO ( )
:NO ( )
124 /