Oki B 4100 Maintenance Manual page 189

3) Paper guide (U) Assembly
a) Separation Rubber
a. The Separation Rubber can be
removed from the Paper Guide
(U) Assembly.
b) Feed Roller
a. Remove the ground cable by re-
moving the two screws 5.
b. Remove the Feed Roller by re-
moving the gear and ADF bear-
ings.
c) Scan Roller
Remove the Scan Roller by re-
moving the gear and ADF bear-
ing.
d) Exit Roller
Remove the Exit Roller while
spreading and holding up the part
of the fixing hooks.
Note: Be careful as not to break the shaft of the
Exit Roller when removing.
(2) Reassembly procedure
Reverse the disassembly procedures.
40055101TH Rev.4
Feed Roller
Ground cable
Screw 5
Gear
ADF bearings
Gear
Separation Rubber
(FX-050VP-C4-011)
Screw 5
(FX-050VP-C4-011)
Fixing hooks
Exit Roller
ADF bearings
(FX-050VP-C4-011)
189 /