Oki B 4100 Maintenance Manual page 18

No. Item
4 Effective reading width
Rev.2
Document width
ISO A4 (210 mm)
[INT'L/FTZ]
NA letter (216 mm)
[US/CANADA]
NA legal (216 mm)
[US/CANADA]
Note Local copy: Pritable reading width in local copy mode
5 Automatic document feeder (ADF)
Rev.3
6 Document skew
7 Document jam detection
8 Document jam removal
40055101TH Rev.4
Table 1.5.1 (2/10) Basic Performance Specifications
Communication
Mode/Paper width
G3/A4
G3/A4
G3/A4
Max. 20 documents for OKIOFFICE44/OKIFAX 4100: NA Let-
ter or A4 (20-1b)
Max. 30 documents for OKIFAX 5000 series: NA Letter or A4
(20-1b)
Max. 15 documents: NA Letter or A4 (13-28lb bond paper)
Documents shall be placed facedown on ADF stacker.
The first sheet will be fed first in the feeder and will exit facedown
in the document stacker.
Max. 2.6 mm skew over a document of A4 length.
For a document longer than A4 length, occurrence of skew
exceeding 2.6 mm over any A4 length is 0.5% or less.
1) Transmission will stop and line disconnection will occur when
the end of a document is not detected within 356 mm after
scanning begins (except for the long document scanning. TF
+ 11)
2) A jam will also be declared if the document does not reach the
scanning position within 5.5 seconds (OKIFAX 5000 series)/
10 seconds (OKIOFFICE44/OKIFAX 4100) after the start of
a document feed.
Note: When a jam is detected during message transmission from
Manual release
Specifications
Effective reading
width
OKIOFFICE44/OKIFAX 4100
208 mm for TX
200 mm for local copy
OKIFAX 5000 series
208 mm for TX
202.8 mm for local copy
OKIOFFICE44/OKIFAX 4100
215 mm for TX
200 mm for local copy
OKIFAX 5000 series
215.1 mm for TX
211.2 mm for local copy
OKIOFFICE44/OKIFAX 4100
215 mm for TX
200 mm for local copy
OKIFAX 5000 series
215.1 mm for TX
211.2 mm for local copy
the feeder, the machine will stop scanning and disconnect
the line, but its receiving capability will remain valid.
Copy size
A4
Letter
Legal
18 /