Option (Board-Memory: Mem, Board-Ctr; Pc Interface) - Oki B 4100 Maintenance Manual

4.1.3.7 Option (Board-Memory: MEM, Board-CTR; PC Interface)

(1) Disassembly procedure
a) Remove the Cover-Rear by removing the
screw 1 and the part of the fixing hooks.
b) Remove the Plate-Earth (PC I/F)
c) Board-Memory (MEM):
Remove Board-Memory on the connector
CN13 of the Board-R44, and removing
the screw to the separation plate.
d) Board-PC Interface (CTR):
Remove Board-Memory on the connector
CN11 and CN12 of the Board-R44, and
removing the two screws to the separation
plate.
Note: Install on the inner side connector for the Board-Memory (MEM) and outside connector for the Board-
PC interface (CTR).
40055101TH Rev.4
Board-Memory
Board-CTR
(PC Interface)
Plate-Earth
(PC I/F)
Screw 1
(CP4.1 Fig. 07)
168 /