Oki B 4100 Maintenance Manual page 135

(2) In case of OKIFAX 5000 series
Remove Rear Cover.
Remove the rear cover by removing
the two screws S1 and S2 .
Install Memory Board:
First, install the memory board on to
the connector CN13 of M17 board,
and then tighten the screw to the
separation plate.
Note:
Fit the fixing hooks at anchor positions on the cassette guide, after that, lift the rear cover
slightly and push it inward.
Tighten the two screws S1 and S2.
40055101TH Rev.4
Rear Cover
S1
FX050-C2-025
Fig. C.1.3
MEM
This toll will be
provided as an
attachment
FX050VP-C2-026
Fig. C.1.4
S2
135 /