4.1.3.13 Registration Roller
(1)
Disassembly procedure
a)
First, carry out procedure up to the point
of the 4.1.3.2 (ID Unit, Cover-Rear, Cover-
NCU and Cover-MAIN).
b)
Move registration roller to the right and
dismount it by lifting. (Two registration
bearings also come off at the same time.
Take care not to lose them.)
(2)
Reassembly procedure
Reverse the disassembly procedures.
40055101TH Rev.4
Registration roller
Registration bearing
(CP4.1 Fig. 28)
174 /