Oki B 4100 Maintenance Manual page 25

No. Item
34 Overheat protection
35 PC interface applications (Option)
Rev.3
Note: This function is the standard
for OKI OFFICE44.
36 Power supply unit and power consump-
tion of the machine
Rev.3
Power consumption of the machine
(Typical power)
Transmit
Receive
Local copy
Standby
(Power Save OFF)
Standby
(Power Save ON)
37 Ambient condition
1) Operating condition
2) Storage condition
40055101TH Rev.4
Table 1.5.1 (9/10) Basic Performance Specifications
The heater of the fuser unit is controlled within the predetermined
temperature range by the thermistor. If the temperature of the heater
exceeds the range, the LCD displays "PRINTER ALARM 4".
Furthermore, the built-in thermostat in the fuser unit prevents the
heater from being overheated even in the event of the failures in the
above temperature control circuit.
The following four modes are supported:
1) PC local printer function
2) PC scanner function
3) PC FaxModem function
4) Location Programing function
Note:
For, details, see product specification for MFP.
OKIOFFICE44
19W
115W
150W
10W
** OKIOFFICE44 has standard PC interface,
therfore has no power save mode.
OKIFAX5300/5600 has no power
save mode.
See Figure 1.5.1
See Figure 1.5.1
Specifications
This function will be supplied as the OKIFAX 4100/5200/
5300/5500/5600 option in case Oki Data can get the
approval in respective countries without modifying the
optional unit.
OKIFAX
OKIFAX 4100
5200/5500
21W
112W 160W
150W 210W
10W 16.6W
0.5W
OKIFAX
5300/5600
60W 60W
160W
210W
16.6W
0.5W
25 /