Table of Contents
Advertisement
Figure 25 Outgoing dialing configuration for second dial tone
Turning on second dial tone using Unified Manager
Config DIP switch 6 is designated for turning on or off second dial tone. Changes to the dial tone
DIP switch become effective, as soon as the DIP switch changes position, and does not require a
restart to take effect. The BCM outgoing dialing must be set to Overlap in order for second dial
tone to work properly.
Use the following steps to turn on second dial tone:
1
Set Config DIP switch number 6 to the up position. See
DIP switch layout.
2
Open the Unified Manager. See the Programming guide for the host system for an explanation
of how to use Unified Manager.
3
Click the Configuration button on the Unified Manager main page.
The Unified Manager main display opens.
4
Enter your Unified Manager login credentials.
5
Expand the Services > Telephony Services > Call routing > Routes headings from the
navigation tree. See
Figure 26 on page
60.
R2MFC Media Bay Module Installation and Configuration Guide
Chapter 5 Configuring the R2MFC MBM
Figure 18 on page 51
59
for the Config
Advertisement
Table of Contents
