Table of Contents
Advertisement
Table 25 MFC directory CLI commands (Sheet 2 of 3)
CLI command
CatgOpt <mfc_link> <flag>
DefltCatgVal <mfc_link><category>
SubsIndOpt <mfc_link> <flag>
DefltSubsVal
<mfc_link><subscriber>
EndDialType
<mfc_link><direction><type>
SetDigitCount <mfc_link>
<count_type> <value>
Description
Defines which MFC category to transmit in outgoing calls.
Where:
mfc_link is the number of the link, 0 or 1.
flag defines the MFC category (default is 0).
Defines the MFC category value when CatgOpt is set to the default value.
Where:
mfc_link is the number of the link, 0 or 1.
category is the MFC category in the range of 1...15.
Defines which subscriber status to send when an incoming MFC call
terminates successfully.
Where:
mfc_link is the number of the link, 0 or 1.
flag is the subscriber status, 0 (subscriber option is default value) or 1
(subscriber option is received value).
Defines the subscriber status value when the SubsIndOpt commands is set
to the default value.
Where:
mfc_link is the number of the link, 0 or 1.
subscriber can have the values of:
•
0 = speech_charge (A group)
•
1 = free_charge
•
2 = free_no_charge
•
3 = control_charge
Defines how to handle MFC end of dial.
Where:
mfc_link is the number of the link, 0 or 1.
direction is 0 (IC), 1 (OG), or 2 (both).
type is either 0 (Ix signal) or 1 (fix number of digits).
Sets the number of expected digits when the EndDialType is set to a fixed
number of digits.
Where:
mfc_link is the number of the link, 0 or 1.
count_type is either 0 (minimal range) or 1 (optional range).
value has values of 3...12 for minimal range or 0...15 for optional range.
R2MFC Media Bay Module Installation and Configuration Guide
Chapter 7 Command Line Interface (CLI) 85
Advertisement
Table of Contents
