Table of Contents
Advertisement
3
Select the appropriate Bus # under Configuration > Resources > Telephony Resources in
the navigation tree.
The Bus # information frame displays. See
an R2MFC MBM configured on Bus 2.0.
Figure 19 BCM Bus configuration for R2MFC MBM
4
Configure the fields in the Details for Module: 2.0 panel. See
settings.
Table 7 Module configuration parameters
Parameter
Trunk type
Protocol
Clock source
Overlap receiving
Local number length
E1 Parameters - CRC4
Figure 19
Setting
PRI
Euro
Primary external (if only one
trunk module in system;
otherwise, it depends on the
synchronization scheme of
the BCM)
Selected (On)
According to BCM local
dialing plan (customer -
dependent)
Note: This field appears
only when the Overlap
receiving field is selected.
Not Selected (Off)
R2MFC Media Bay Module Installation and Configuration Guide
Chapter 5 Configuring the R2MFC MBM
for an example of the screen layout for
Table 7
53
for parameters and
Advertisement
Table of Contents
