Table of Contents
Advertisement
Figure 23 BCM E1 parameters configuration for R2MFC MBM
10 Select Modules on bus > Module 1 > Provision lines from the navigation tree. See
on page
58.
The Bus # - Module # - E1 parameters Information frame displays.
11 Select an individual line that is displayed under the Provision lines heading. See
page
58.
The Bus # - Module # - Line # information frame displays.
12 Select Provisioned from the Status drop-down list.
13 Repeat Steps
E1. There should be 30 channels, unless a partial E1 service is arranged with the CO.
See
Figure 24 on page 58
on Bus 06.
11
and
12
for every active B-channel that is provisioned for the corresponding
for an example of the screen layout for an R2MFC MBM configured
R2MFC Media Bay Module Installation and Configuration Guide
Chapter 5 Configuring the R2MFC MBM
Off
57
Figure 24
Figure 24 on
Advertisement
Table of Contents
