Table of Contents
Advertisement
70
Chapter 6 R2MFC MBM maintenance
Figure 28 Upgrading firmware overview
Firmware Upgrade
Required
Copy the firmware load
and PC program files to
PC
Connect PC to the
R2FMC MBM
Open a Hyper-terminal
session to connect to
R2FMC MBM
Perform the following steps to download the firmware the R2MFC MBM:
1
Copy the firmware load file and the PC program files, bload1.exe, to the same directory on the
PC.
2
Use the shipped cable, part number N0026100, to connect a PC to the RS-232 port on the
faceplate of the R2MFC MBM through COM1.
3
Open a new Hyper-terminal session on the PC using the parameters listed in
Table 16 Hyper-terminal setup parameters
Parameter
Connect using
Bits per second
Data bits
Parity
Stop Bits
Flow Control
4
Go to step
BOOT program displays:
load, switch, fload, fswitch, checksum, DisMem, DisWord, *=quit
----> user monitor:
5
Wait for the monitor line (flashing cursor) to appear on the terminal session.
NN40010-300
Is f irmware
corrupted?
No
Disable links
Setting
COM 1
19 200
8
None
1
None
11
if the existing firmware is corrupted. Corrupted firmware is indicated if the
Y es
Prepare R2FMC MBM for
upload
Upload new firmware
file
Verify the version of
new firmware
Disconnect PC from
R2FMC MBM
Check the module to see
if it is working properly
Table
16.:
Advertisement
Table of Contents
