Mexico Config 2; E1 Physical Characteristics; E1 Framing; Register Signaling - Nortel R2MFC Installation And Configuration Manual

Table 30 Interpretation of transmitted MFC signals (Sheet 2 of 2)
Meaning
BW_OrigDn
BW_FreeCharge
BW_FreeNoChrg
BW_CntrCharge
BW_Busy
BW_Unlocated
BW_OutOfOrder
BW_ChangOrder
FW_ReqFault
FW_EndDigits

Mexico Config 2

E1 physical characteristics

• Connector type: BNC
• Line coding: HDB3

E1 framing

Frame mode: Alternate

Register signaling

• Regret option: OFF
• End of dialing (Incoming): terminated by indication from destination switch, or by MFC
forward signal FW_EndDigits
• End of dialing (Outgoing): terminated by indication from destination switch, or by MFC
forward signal FW_EndDigits
Signal Meaning
A_1 FW_Digit_7
B_1 FW_Digit_8
B_5 FW_Digit_9
B_1 FW_Digit_0
B_2 FW_Digit_11
B_4 FW_Digit_12
B_4 FW_Digit_13
B_4 FW_Digit_14
I_15 FW_Digit_15
I_15 FW_Categ_1
R2MFC Media Bay Module Installation and Configuration Guide
Configuring DIP switch settings and definitions
Signal Meaning
I_7 FW_Categ_9
I_8 FW_Categ_10
I_9 FW_Categ_11
I_10 FW_Categ_12
I_11 FW_Categ_13
I_12 FW_Categ_14
I_13 FW_Categ_15
I_14 FW_KD_Local
I_15 FW_KD_LnDst
II_1
95
Signal
II_9
II_10
II_11
II_12
II_13
II_14
II_15
II_3
II_2