Table of Contents
Advertisement
80 Chapter 7 Command Line Interface (CLI)
Table 22 COnfig directory CLI commands (Sheet 2 of 2)
CLI command
EraseCfg
DEbnc <link> <msec>
ST <year> <month> <day> <hour>
<min> <sec>
NN40010-300
Description
Erases the configuration from non-volatile Flash memory.
As a result, the custom profile does not exist, and other parameters are not
included in custom profile use factory default settings. A live system is not
affected, because current configuration is stored in RAM. The R2MFC MBM
tries to read configuration from Flash memory on restart.
Updates the line signal debounce time.
Where:
link is the link number, either 0 or 1.
msec is the time, in milliseconds, ranging from 10 to 200.
The value for msec should be in multiples of 5. If not, then the system
rounds it off to the nearest multiple of 5.
Sets the current system time.
Where:
year = yyyy
month = 1...12
day = 1...31
hour = 0...23
min = 0...59
sec = 0...59
If you enter the ST command without parameters, the system displays the
current system time.
Advertisement
Table of Contents
