Table of Contents
Advertisement
60
Chapter 5 Configuring the R2MFC MBM
The routes configured on the BCM are listed below the Routes heading.
6
Select the route that is to be configured under the Routes heading. See
The Route # information frame displays.
7
Select Overlap from the Service type drop-down list.
8
Repeat Steps
There will be 30 channels, unless a partial E1 service is arranged with the CO.
See
Figure 26 on page 60
dialing parameters for second dial tone on the R2MFC MBM.
Figure 26 Outgoing dialing configuration for second dial tone
NN40010-300
6
and
7
for every active B-channel that is provisioned for the corresponding E1.
for an example of the screen layout for configuring the outgoing
Figure 26 on page
60.
Advertisement
Table of Contents
