3-3. Setting the Input Function Level
• Correct the playback level of the different input sources.
• Adjust the playback levels of the devices connected to the different input sources to the same level to eliminate the need for adjusting the main
volume each time the input source is switched.
1
(Main unit)
2
(Main unit)
3
q Select the input source.
(Main unit)
4
(Main unit)
After completing this setting, check that the playback levels for the different sources are the same.
64
Select "Input Function Lev." at the Audio Input
Setup menu.
(Remote control unit)
Display the Input Function Lev. screen.
(Remote control unit)
(Remote control unit)
Enter the setting.
The Audio Input Setup menu reappears.
(Remote control unit)
* A u d i o I n S e t u p
I n p u t F u n c . L e v .
* I n p u t F u n c . L e v
T U N E R :
0 d B
w Adjust the level.
The level can be adjusted between –12 dB and +12 dB in units
of 1 dB.
When "Yes" is selected for "Default", then press the cursor
left button to reset to the default values.
(Main unit)
(Remote control unit)