Setting The 2Ch Direct/Stereo; Setting The Front B Speakers When The Surround Mode Is Set To The 2-Channel Direct Or Stereo - Denon AVC-A1XVA Operating Instructions Manual

5-1. Setting the 2ch Direct/Stereo

• Set this when you want to change the speaker settings when the surround mode is set to the 2-channel Direct or Stereo mode.
1
(Main unit)
2 Display the 2ch Direct / Stereo screen.
(Main unit)
* 2 c h D R C T / S T
S e t t i n g B a s i c
3
(Main unit)
4
q Select the setting.
(Main unit)
5
(Main unit)
2 Setting the front B speakers when the surround mode is set to the 2-channel
Direct or Stereo
When "Adv+Front B" is selected at "7-2. Power Amp Assign" and "Custom" is selected at this
setting, the "Front B" setting is displayed.
• To play signals from the Front B speaker when in the 2-channel Direct or Stereo mode, set
"Used".
78
Select "2ch Direct / Stereo" at the Advanced Playback
menu.
(Remote control unit)
(Remote control unit)
Select "Custom".
(Remote control unit)
(Remote control unit)
Enter the setting.
The Advanced Playback menu reappears.
(Remote control unit)
* A d v a n c e d P l a y
2 c h D R C T / S T
Example: This screen is displayed in function of the settings made at "2-1. Speaker
Configuration", "2-2. Subwoofer Setup", "2-3. Delay Time" and "2-4. Crossover
Frequency".
* 2 c h D R C T / S T
S e t t i n g C u s t o m
w Select the parameter.
(Main unit) (Remote control unit)