Setting The Channel Level For Zone2 - Denon AVC-A1XVA Operating Instructions Manual

6-4. Setting the Channel Level for ZONE2

• Use this setting to adjust so that the playback level between the different channels of ZONE2 is equal.
• From the ZONE2 listening position, listen to the test tones produced from the speakers used in ZONE2 to adjust the level.
• The level can also be adjusted directly from the Remote control unit. (For details, see pages 173, 174.)
1
(Main unit) (Remote control unit)
2
(Main unit) (Remote control unit)
3
(Main unit) (Remote control unit)
4
(Main unit) (Remote control unit)
5
(Main unit) (Remote control unit)
Select "Channel Level" at the Zone Setup menu.
* Z o n e S e t u p
Z 2 C h a n n e l L e v .
Display the Channel Level screen.
* Z 2 C h a n n e l L e v
T . T o n e : A u t o
Select the mode.
Select "Auto" or "Manual".
* Z 2 C h a n n e l L e v
T . T o n e : A u t o
Auto :
Adjust the level while listening to the test tones
produced automatically from each speaker.
Manual :
Select the speaker from which you want to
produce the test tone to adjust the level.
Select "Test Tone Start".
* Z 2 C h a n n e l L e v
T o n e S t a r t : Y e s
Select "Yes".
Example: When the "Auto" mode is selected
89