Operation; Operating The Remote Control Unit - Denon AVC-A1XVA Operating Instructions Manual

9 OPERATION

Operating the Remote control unit

The RC-1036 remote control has a backlit EL display whose contents
change according to the mode or function selected, with the
appropriate remote commands for that mode or function.
2 Operate the this unit
The AMP button is the main mode for controlling the AVC-A1XVA in
the main room (MAIN ZONE).
The function switches as shown below each time one of the AMP
button is pressed.
AMP ZONE 2
SYSTEM CALL
The EL display switches as shown below with respect to the
selected mode.
2 AMP mode
To operate the MAIN ZONE function.
2 ZONE2 mode
To operate the ZONE2 function.
ZONE 3
ZONE 4
2 ZONE3 mode
To operate the ZONE3 function.
2 ZONE4 mode
To operate the ZONE4 function.
2 SYSTEM CALL mode
To operate the "System call" function.
NOTE:
• This function provides the ability to program a series of individual
remote control codes into a macro stored under one of the
number pad's numeric choices (See pages 123, 124).
127