6
Repeat step 5 to input the input source name.
To reset the input source name to the default value, press the cursor left or right button to
highlight the input source display, then press the cursor down button.
When "Yes" is selected for "Default", then press the cursor left button to reset to the
default input source name.
(Main unit)
(Remote control unit)
7
(Main unit)
8
(Main unit)
When the input source is selected, the display is as shown below.
66
(Main unit)
(Remote control unit)
(Remote control unit)
Once all the characters have been input, press the ENTER button.
The Function Rename screen reappears.
Use the same procedure to change other input source names as well.
(Remote control unit)
Enter the setting.
The Audio Input Setup menu reappears.
(Remote control unit)
(Main unit)
T U - 1 5 0 0
S T E R E O
Example: When the name has been changed to "TU-1500"
R e n a m e T U N E R
R e n a m e
C l e a r
R e n a m e T U N E R
D e f a u l t : Y e s