Setting The Input Function Level; Setting The Function Rename; Setting The Ieee1394 Assign - Denon AVC-A11XV Operating Instructions Manual

ENGLISH
Advanced Setup – Part 1

Setting the Input Function Level

• Correct the playback level of the different input
sources.
• Adjust the playback levels of the devices connected
to the different input sources to the same level to
eliminate the need for adjusting the main volume
each time the input source is switched.
1 CURSOR D D H H
Press the or
select the "Input Function Lev." at the
"Audio Input Setup" menu, then press
ENTER
the button.
• Display the "Input Function Lev." screen.
2 CURSOR D D H H
Press the or
select the input source, then press the
CURSOR F F G G
or button to adjust the
level.
The level can be adjusted between –12 dB and
+12 dB in units of 1 dB.
If "Yes" is selected for "Default", the settings
are automatically reset to the default values.
3
ENTER
Press the button to enter the
setting.
• The "Audio Input Setup" menu reappears.
• After completing this setting, check that the
playback levels for the different sources are the
same.

Setting the Function Rename

The names of the input sources displayed on the front
display and on the on screen display can be changed.
The names or brands of the devices connected to the
input sources can be input.
1 CURSOR D D
Press the
select the "Function Rename" at the
button to
"Audio Input Setup" menu, then press
ENTER
the button.
• Display the "Function Rename" screen.
2
CURSOR D D
Press the
select the input source whose name you
button to
want to change, then press the
F F G G
or button.
• The screen switches to the character input
screen.
Example:
When "DVD" is selected and the CURSOR F F
or G G button is pressed
3
CURSOR F F
Press the
move the cursor ( ) to the character,
2 2
number, symbol or punctuation mark
you wish to input, and press the
CURSOR D D H H
or button to select that
character.
A B C D E F G H I J K L M N O P Q
R S T U V W X Y Z a b c d e f g h i j
k l m n o p q r s t u v w x y z 0 1 2 3
4 5 6 7 8 9
! " # % & ' ( ) * + , – . / : ; < = > ? @ [
\ ] (space)
Up to 8 characters can be input.
4
Repeat step 3 to input the input source
name.
If you wish to set the input source back to as it
was initially, press the CURSOR H H button with the
input source highlighted.
If "Yes" is selected for "Default", the setting are
H H
or button to
automatically reset to the default name.
5
Once all the characters have been input,
ENTER
press the
• The "Function Rename" screen reappears.
Use the same procedure to change other input
H H
or button to
source names as well.
CURSOR
6
ENTER
Press the
setting.
• The "Audio Input Setup" menu reappears.
• When the input source is selected, the display is as
shown below.
Example:
When the name has been changed to "DVD-A1XV"
G G
or button to
43
ENGLISH

Setting the IEEE1394 Assign

Assign the device connected by IEEE1394 cable to an
input source. The power of the device to be assigned
must be turned on ahead of time.
1
Press the
select the "IEEE1394 Assign" at the
"Audio Input Setup" menu, then press
ENTER
the
• Display the "IEEE1394 Assign" screen.
button.
2
Press the
select the device, then press the
CURSOR F F
input source.
button to enter the
3
Press the
setting.
• The "Audio Input Setup" menu reappears.
Advanced Setup – Part 1
CURSOR D D H H
or button to
button.
CURSOR D D H H
or button to
G G
or button to select the
ENTER
button to enter the