Relationship Between The Video Input Signal And Monitor Output (Main Zone) - Denon AVC-A1XVA Operating Instructions Manual

Relationship between the video input signal and monitor output according to the VIDEO
CONVERT MODE settings of MAIN ZONE
Video convert
HDMI
E E
E E
E E
E E
E E
E E
E E
E E
E E
E E
E E
E E
E E
E E
E E
E E
ON
C C
C C
C C
C C
C C
C C
C C
C C
C C
C C
C C
C C
C C
C C
C C
C C
C C : Signal input
E E : No signal
480p ~ 720p : 480p/576p/1080i/720p
NOTES:
• The MAIN ZONE video conversion function is compatible with
the following format: NTSC, PAL, SECAM, NTSC4.43, PAL-N,
PAL-M and PAL-60.
• When SECAM signals of video input are up-converted, the
signals are output in PAL format from the S-Video connector.
• When the input signal is set to component video 1080p, the
signals cannot be output to the HDMI monitor output terminal.
Input signals
COMPONENT S-VIDEO VIDEO
E E E E
E E E E
E E C C
E E C C
C C (1080p) E E
C C (480p ~ 720p) E E
C C (480i/576i) E E
C C (1080p) E E
C C (480p ~ 720p) E E
C C (480i/576i) E E
C C (1080p) C C
C C (480p ~ 720p) C C
C C (480i/576i) C C
C C (1080p) C C
C C (480p ~ 720p) C C
C C (480i/576i) C C
E E E E
E E E E
E E C C
E E C C
C C (1080p) E E
C C (480p ~ 720p) E E
C C (480i/576i) E E
C C (1080p) E E
C C (480p ~ 720p) E E
C C (480i/576i) E E
C C (1080p) C C
C C (480p ~ 720p) C C
C C (480i/576i) C C
C C (1080p) C C
C C (480p ~ 720p) C C
C C (480i/576i) C C
HDMI COMPONENT
E E E E
C C
VIDEO VIDEO
E E S-VIDEO S-VIDEO
C C
S-VIDEO S-VIDEO
E E E E
COMPONENT
E E COMPONENT COMPONENT
E E
COMPONENT COMPONENT
COMPONENT ✳1
C C VIDEO
COMPONENT ✳1 COMPONENT ✳1
C C
COMPONENT ✳1 COMPONENT ✳1
C C
COMPONENT ✳2
E E S-VIDEO
COMPONENT ✳2 COMPONENT ✳2
E E
COMPONENT ✳2 COMPONENT ✳2
E E
COMPONENT ✳2
C C S-VIDEO
COMPONENT ✳2 COMPONENT ✳2
C C
COMPONENT ✳2 COMPONENT ✳2
C C
E E
HDMI
C C VIDEO
HDMI
S-VIDEO ✳2
E E HDMI
S-VIDEO ✳2
C C
HDMI
E E HDMI COMPONENT
E E HDMI COMPONENT
E E
HDMI COMPONENT
✳1 COMPONENT ✳1
HDMI
C C
✳1 COMPONENT ✳1
C C HDMI
✳1 COMPONENT ✳1
HDMI
C C
✳2 COMPONENT ✳2
HDMI
E E
✳2 COMPONENT ✳2
E E HDMI
✳2 COMPONENT ✳2
HDMI
E E
✳2 COMPONENT ✳2
HDMI
C C
✳2 COMPONENT ✳2
C C HDMI
✳2 COMPONENT ✳2
HDMI
C C
E E : Not output
1.HDMI MONITOR OUT:
When there is no HDMI input signal and "HDMI" is selected for the "Scaler"
setting, the signal is output as set with the "Resolution" setting.
When "Component" is selected for the "Scaler" setting, the signal is output
with the same resolution as the input signal.
2.COMPONENT MONITOR OUT
When "Component" is selected for the "Scaler" setting, the signal is output
as set with the "Resolution" setting. However, the output resolution is
limited to a maximum of 480p/576p if the input signal is copyright-protected.
✳1
: On screen display superimposed on video signal and output.
✳2
: On screen display superimposed on S-Video signal and output.
✳3
: Video signals are not output when the analog to HDMI convert function
is set to "ON".
: When "OFF" is selected for the "Analog to HDMI Convert" setting, no
video signals other than the HDMI input signal are output.
: On screen display only displayed for SYSTEM SETUP, SURROUND
PARAMETER and OSD buttons.
MONITOR OUT
S-VIDEO
E E E E
VIDEO
S-VIDEO
S-VIDEO
E E
E E
COMPONENT COMPONENT
VIDEO
✳3
VIDEO
COMPONENT ✳1
S-VIDEO
S-VIDEO
S-VIDEO
S-VIDEO
S-VIDEO
S-VIDEO
E E E E
✳2
VIDEO
S-VIDEO
S-VIDEO
E E
E E
COMPONENT COMPONENT
VIDEO
✳3
VIDEO
COMPONENT ✳1
S-VIDEO
S-VIDEO
S-VIDEO
S-VIDEO
S-VIDEO
S-VIDEO
VIDEO
E E
VIDEO
S-VIDEO
S-VIDEO
E E
E E
VIDEO
VIDEO
VIDEO
S-VIDEO
S-VIDEO
S-VIDEO
S-VIDEO
S-VIDEO
S-VIDEO
E E
VIDEO
S-VIDEO
S-VIDEO
E E
E E
VIDEO
VIDEO
VIDEO
S-VIDEO
S-VIDEO
S-VIDEO
S-VIDEO
S-VIDEO
S-VIDEO
195