Connecting Video Components Equipped With Component; Video Video Jacks - Denon AVC-A1XVA Operating Instructions Manual

Connecting video components equipped with Component Video (color difference) video jacks
(Component - Y, P
• When making connections, also refer to the operating instructions of the other components.
• The signals input to the component (color difference) video jacks are not output from the VIDEO output jack (yellow) or the S-Video output jack.
• Some video sources with component video outputs are labeled Y, P
color difference output.
• The function assigned to the component video input can be changed at the system setup. For details, see "Setting the Component In
Assignment". (See page 71)
DVD player
COMPONENT
VIDEO OUT
Y P P
B R
Connecting a monitor
MONITOR OUT jack
• Connect the TV's component (color difference) video input jacks (COMPONENT VIDEO INPUT) to the
COMPONENT MONITOR OUT-2 jack using 75 Ω/ohms coaxial video pin-plug cords.
• Connect the TV's component (color difference) video input jacks (COMPONENT VIDEO INPUT) to the
COMPONENT MONITOR OUT-1 jack using BNC connectors.
• The COMPONENT MONITOR OUT-1 and the COMPONENT MONITOR OUT-2 can be used simultaneously.
14
, P ; Y, C , C )
B R B R
Connecting a DVD player
DVD IN jacks
• Connect the DVD player's component (color difference) video output jacks
(COMPONENT VIDEO OUTPUT) to the COMPONENT DVD IN jack using 75
Ω/ ohms coaxial video pin-plug cords.
• In the same way, another video source with component video outputs such
as a DTV/DBS tuner, etc., can be connected to the TV/DBS component
(color difference) video jacks.
• The component video input and/or output jacks may be labeled differently
on some TVs, monitors or video components (Y, P
Y). Check the owner's manuals for other components for further
information.
, P , or Y, C , C , or Y, B-Y, R-Y. These terms all refer to component video
B R B R
, P ; Y, C , C ; Y, B-Y, R-
B R B R
Monitor
COMPONENT
VIDEO IN
Y P P
B R