Setting The Channel Level - Denon AVC-A1XVA Operating Instructions Manual

2-4. Setting the Channel Level

• Use this setting to adjust so that the playback level between the different channels is equal.
• From the listening position, listen to the test tones produced from the speakers to adjust the level.
• The level can also be adjusted directly from the Remote control unit. (For details, see pages 137, 138.)
• The level of each channel should be adjusted to 75 dB (C-weighted, slow meter mode) on a sound level meter at the listening position.
If a sound level meter is not available adjust the channels by ear so the sound levels are the same. Because adjusting the subwoofer level test
tone by ear is difficult, use a well known music selection and adjust for natural balance.
1
(Main unit) (Remote control unit)
2
(Main unit) (Remote control unit)
3
(Main unit) (Remote control unit)
4
(Main unit) (Remote control unit)
5
(Main unit) (Remote control unit)
Select "Channel Level" at the Speaker Setup menu.
* S p e a k e r S e t u p
C h a n n e l L e v e l
Display the Channel Level screen.
* C h a n n e l L e v e l
T . T o n e : A u t o
Select the mode.
Select "Auto" or "Manual".
* C h a n n e l L e v e l
T . T o n e : A u t o
Auto :
Adjust the level while listening to the test tones
produced automatically from each speaker.
Manual :
Select the speaker from which you want to produce
the test tone to adjust the level.
Select "Test Tone Start".
* C h a n n e l L e v e l
T o n e S t a r t : Y e s
Select "Yes".
Example: When the "Auto" mode is selected
53