Punch Through; System Call - Denon AVC-A1XVA Operating Instructions Manual

(3) Using the system call function
1 Press the AMP button to select SYSTEM
CALL mode.
2 Press the SYSTEM CALL button
(1 to 3) at which the system call
signals have been stored.
• The stored
transmitted successively.

Punch Through

Buttons used in the CD, DVD, and VCR modes can be assigned to the
buttons which are not normally used in the TV and SAT/CBL modes.
For example, when the DVD mode is set to the punch through mode
in the TV mode, the DVD mode's PLAY (1), STOP (2), MANUAL
SEARCH (6, 7), AUTO SEARCH (8, 9) and PAUSE (3)
button's signals are sent in the TV mode. — (
1 Press and hold the RC SETUP button for at
least three seconds.
• The IR segment blinks twice.
2 Press the "9, 8, 4" button (9
→ →
8 4) to select punch
through setting.
• The IR segment
twice.
3 Select the mode selector button
(CD, DVD or VCR) you want to
punch through.
4 Press the button you want to punch
through ( , ,
1 2 6
).
3
5 Repeat step 4.
124
signals are
)
blinks
, , , or
7 8 9
1
2
3, 6
6 Press the mode selector button
(TV or SAT/CBL) for which you
want to set the punch through.
7 Press and hold the RC SETUP button for at
least three seconds to register the system
call.
• The IR segment blinks twice.
IR segment
2
1, 7