Memory And Call-Out Functions (User Mode Function) - Denon AVC-A1XVA Operating Instructions Manual

Parameters
MODE:
DH1 ...........Reference room (small room with weak reverberations)
DH2 ...........Live room (room with a bit stronger reverberations than DH1)
DH3 ...........Large room (larger room than DH1, offers a sense of distance and sound diffusion effects)
BYPASS .....Stereo sound.
DECODER:
Select this when playing analog, PCM or other 2-channel sources.
The signals are converted into multichannel signals using the decoders shown below and played in the Dolby Headphone mode.
II
PL C.........Dolby Pro Logic
II
PL M........Dolby Pro Logic
NEO:6 C.....DTS NEO:6 Cinema mode
NEO:6 M....DTS NEO:6 Music mode
OFF............The signals are played in the Dolby Headphone mode as such (2 channels).
– Recording –
When RECOUT mode is set to "SOURCE", with this amplifier signals encoded in the Dolby Headphone mode can be output from the recording
output terminals and recorded on another recorder. (See page 136)

Memory and call-out functions (USER MODE function)

• The AVC-A1XVA is equipped with a function for storing the selected input source, the auto surround mode and input mode in the memory and
selecting these settings when you want to use them.
• Three patterns of settings can be stored in the memory using the USER MODE 1, 2 and 3 buttons.
2 Storing the settings in the memory
2
1
The following are stored in the memory:
q Currently set input source
w Currently set auto surround mode
e Currently set input mode
2
Press and hold the USER MODE button at which you want to
store the settings.
In this case, press the button and hold it in until the LED of
the selected USER MODE button lights.
(Main unit)
150
II
Cinema mode
II
Music mode
2
(Remote control unit)
2 Calling the settings out
1
1
Press the USER MODE button at which the settings you
want to call out are stored.
• The LED for the selected USER MODE button lights.
• This LED turns off if you perform any operations that
change the settings stored at the USER MODE buttons.
Light
(Main unit)
1
(Remote control unit)