Additional Information; Optimum Surround Sound For Different Sources - Denon AVC-A1XVA Operating Instructions Manual

17 ADDITIONAL INFORMATION

Optimum surround sound for different sources

There are currently various types of multi-channel signals (signals or formats with more than two channels).
Types of multi-channel signals
2
Dolby Digital (including Surround EX), DTS (including Surround ES), DVD-Audio, and Super Audio CD.
Note on the above: MUSE 3.1 and MPEG multi-channel audio are not available to North American consumers – same is true for Dolby's AAC.
"Source" here does not refer to the type of signal (format) but the recorded content. Sources can be divided into two major categories.
2 Types of sources
• Movie audio Signals created to be played in movie theaters. In general sound is recorded to be played in movie theaters equipped
with multiple surround speakers, regardless of the format (Dolby Digital, DTS, etc.).
Movie theater sound field
FL SW C FR
SL
SB
Multiple surround speakers
• Other types of audio These signals are designed to recreate a 360° sound field using three to five speakers.
FL SW C FR
SL SR
These two types of sources thus have different properties, and different speaker settings, particularly for the surround speakers, are required
in order to achieve the ideal sound.
The AVC-A1XVA's surround speaker selection function makes it possible to change the settings according to the combination of surround
speakers being used and the surrounding environment in order to achieve the ideal surround sound for all sources. This means that you can
connect a pair of bipolar or dipolar surround speakers (mounted on either side of the prime listening position), as well as a separate pair of
direct radiating (monopolar) speakers placed at the rear corners of the listening room.
Listening room sound field
SR
FL
SW
SL
In this case the speakers should surround the listener from all sides to create a uniform sound field
from 360°. Ideally the surround speakers should function as "point" sound sources in the same way
as the front speakers.
In this case it is important to achieve the same sense of
C FR
expansion as in a movie theater with the surround channels.
To do so, in some cases the number of surround speakers is
SR
increased (to four or eight) or speakers with bipolar or dipolar
properties are used.
SL: Surround L channel
SR: Surround R channel
SB
SB: Surround B (back) channel
181