Denon AVC-A1XVA Operating Instructions Manual page 112

4
(Main unit)
5
(Main unit)
6
(Main unit)
7
(Main unit)
(Remote control unit)
8
(Main unit)
NOTES:
• DHCP (Dynamic Host Configuration Protocol):
These are systems by which the IP address and other network settings are automatically set for the AVC-A1XVA, computer, broadband
router and network devices.
• DNS (Domain Name System):
This is a system for converting the domain names used when browsing Internet sites (for example, "www.denon.jp") into the IP
addresses actually used for communications (for example, "202.221.192.106").
112
Press the ENTER button.
• The "IP Address" screen appears.
(Remote control unit)
Select "OFF".
• The DHCP function is disabled.
(Remote control unit)
Select the desired setting item.
(Remote control unit)
Input the address.
IP Address
(Main unit)
Subnet Mask : When connecting an xDSL modem or terminal adapter directly to the AVC-
Gateway
Primary DNS / Secondary DNS:
(Remote control unit)
Press the ENTER button to enter the setting.
• The "IP Address" menu reappears.
(Remote control unit)
: Set the IP address within the ranges shown below. The Network Audio function
cannot be used if other IP addresses are set.
CLASS A: 10.0.0.0 ~ 10.255.255.255
CLASS B: 172.16.0.0 ~ 172.31.255.255
CLASS C: 192.168.0.0 ~ 192.168.255.255
A1XVA, input the subnet mask indicated in the documentation supplied by your
provider. Normally input 255.255.255.0.
: When connected to a gateway (router), input its IP address.
If there is only one DNS address indicated in the documentation supplied by
your provider, input it at "primary DNS". If there are two or more DNS
addresses, input the first one at "Second DNS".