Denon AVC-A1XVA Operating Instructions Manual page 88

6
(Main unit)
When "Step" is selected, you can select the unit of "0.1 m (1 ft)" or "0.01 m (0.1 ft)".
When "Yes" is selected for "Default", then press the cursor left button to reset to the
default values.
Please note that the difference of distance for every speaker should be 6.0 m (20 ft) or less. If
you set an invalid distance, a CAUTION notice, such as screen right will appear. In this case,
please relocate the blinking speaker(s) so that its distance is no larger than the value shown in
highlighted line.
7
(Main unit)
88
Set the distance between the center speaker and listening position.
The distance changes in units of 0.1 meters (1 foot) or 0.01 meters (0.1 foot) each time the
button is pressed. Select the value closest to the measured distance.
(Remote control unit)
Enter the setting.
The Zone Setup menu reappears.
The AVC-A1XVA automatically sets the optimum surround delay time for the ZONE2 listening
room.
(Remote control unit)
Example: When the distance is set to 3.0 m
for the center speaker