Setting The Video Setup For Zone2; Video Convert Mode - Denon AVC-A1XVA Operating Instructions Manual

6-6. Setting the Video Setup for ZONE2

[1] Video Convert Mode (ZONE2)
• Set whether or not to use the video conversion function for the signal output to the ZONE2 monitor output terminal.
1
(Main unit)
2
(Main unit)
3
(Main unit)
(Remote control unit)
4
q Select the ZONE2 input source.
(Main unit)
ON : When there are multiple input signals for the input sources selected at ZONE2, the input signal is detected and the input
signal output to the ZONE2's monitor output terminal is selected automatically, in the following order of priority:
Component, S-Video, Composite.
OFF : The convert function does not operate.
The video signal of the input source selected at ZONE2 is only output to the ZONE2 video monitor output terminal.
The S-Video signal selected at ZONE2 is only output to the ZONE2 S-Video monitor output terminal.
92
Select "Video Setup" at the Zone Setup menu.
(Remote control unit)
Display the Video Setup screen.
(Remote control unit)
Select "Video Convert Mode", then press the
ENTER button.
Display the Video Convert Mode.
(Main unit)
(Remote control unit)
(Remote control unit)
* Z o n e S e t u p
Z 2 V i d e o S e t u p
* Z 2 V i d e o S e t u p
Z 2 V i d e o C o n v .
* Z 2 V i d e o C o n v .
D V D : O N
w Select the mode as below.
The details in each mode are as follows.
ON OFF
(Main unit) (Remote control unit)