Table of Contents
Advertisement
Connecting the ZONE2 jacks
2 ZONE2 preout CONNECTIONS
• If another power amplifier is connected, the ZONE2 preout (variable level) jacks can be used to play a different program source in ZONE2 the
same time. (See page 166)
• The ZONE2 video out is only use for the ZONE2.
• The connection diagram below is an example of multi-channel playback in ZONE2. Please see page 168 when you would like to have 2-
channel playback in ZONE2.
CONTROL terminal
These terminals are used for an exteral controller.
Perform the following operation before using an external
controller connected to the RS-232C terminal:
1. Press the ON/STANDBY button on the main unit and set
the unit to the operating mode.
2. Perform the operation to turn off the power from the
external control.
3. Check that the product has been set to the standby
mode.
After checking the above, check the connections of the
external controller. Operation is possible.
TRIGGER OUT
Turn the DC 12V voltage on and off for the individual functions
and surround modes.
For details, see "Setting the Trigger Out". (See pages 106, 107)
Extension jacks for future use.
For instructions on operations using the MULTI ZONE jacks, see pages 166 ~ 179.
See pages 169, 170 for the connection method of ZONE3 and ZONE4.
Connecting a component with video and audio jacks to the V.AUX input jacks
L
R
• To connect the video signal, connect using a 75 Ω/ohms video signal cord.
Connecting a Video game
• Connect the Video game component's output
jacks to this unit's V. AUX INPUT jacks.
OPTICAL
DIGITAL OUT
LINE OUT
VIDEO OUT
L
R
R
L
• Connect the video camera component's output
Video game
OUTPUT
R
L
VIDEO OUT
S-VIDEO OUT
R
L
S-VIDEO OUT
Another room
TV
Power amplifier
INFRARED SENSOR
AUX OUT
INFRARED RETRANSMITTER
Connecting a video camera
jacks to this unit's V. AUX INPUT jacks.
Video camera
OUTPUT
R
L
VIDEO OUT
S-VIDEO OUT
R
L
LINE OUT
VIDEO OUT
S-VIDEO OUT
OUTPUT
INPUT
19
Hide quick links:
Advertisement
Table of Contents
