Playing The Input Source - Denon AVC-A1XVA Operating Instructions Manual

Playing the input source

1 1
3 2
1 Select the input source to be played.
Example: CD
(Main unit)
When the input source is selected the
input indicator lights.
To select the input source when ZONE2
SELECT or ZONE3/4/REC SELECT is
selected, press the SOURCE button
then operate the input function selector.
2 Select the input mode.
• Selecting the AUTO, PCM and DTS modes
The mode switches as shown below each time the INPUT
MODE button is pressed.
When operating the main unit:
The mode switches as shown below each time the INPUT
MODE button on the main unit is pressed:
AUTO
When operating the remote control unit:
The mode switches as shown below each time the INPUT
MODE button on the remote control unit is pressed:
AUTO
EXT.IN -2
(Main unit)
• Selecting the analog mode
Press the ANALOG button on the main unit or INPUT
MODE button on the remote control unit to switch to the
analog input.
(Main unit)
5
(Remote control unit)
CD
Light
(Main unit)
PCM DTS
PCM DTS
EXT.IN -1 ANALOG
(Remote control unit)
(Remote control unit)
2
3
Input mode selection function
Different input modes can be selected for the different input sources.
The selected input modes for the separate input sources are stored in
the memory.
q AUTO (All auto mode)
In this mode, the types of signals being input to the digital and
analog input jacks for the selected input source are detected and
the program in the AVC-A1XVA's surround decoder is selected
automatically upon playback. This mode can be selected for all
input sources other than PHONO.
The presence or absence of digital signals is detected, the signals
input to the digital input jacks are identified and decoding and
playback are performed automatically in DTS, Dolby Digital or PCM
(2 channel stereo) format. If no digital signal is being input, the
analog input jacks are selected.
Use this mode to play Dolby Digital signals.
w PCM (exclusive PCM signal playback mode)
Decoding and playback are only performed when PCM signals are
being input.
Note that noise may be generated when using this mode to play
signals other than PCM signals.
e DTS (exclusive DTS signal playback mode)
Decoding and playback are only performed when DTS signals are
being input.
r ANALOG (exclusive analog audio signal playback mode)
The signals input to the analog input jacks are decoded and played.
t EXT. IN (external decoder input jack selection mode)
The signals being input to the external decoder input jacks are
played. (See page 131)
5
1
129