Setting The Crossover Frequency - Denon AVC-A1XVA Operating Instructions Manual

2-5. Setting the Crossover Frequency

• Set the crossover frequency according to the low frequency response characteristics of the various (front, center, surround and surround back)
speaker systems.
• If a connected main or surround loudspeaker has a specified –3 dB low frequency response rolloff, adjust the crossover frequency for that
speaker to match the specified low frequency response limit – e.g. 80 Hz.
• When a speaker is set to SMALL, low frequencies in that channel that are below the crossover frequency are directed to the system's
subwoofer(s), or to speakers that are set to LARGE, for systems with no connected subwoofer(s).
1
(Main unit) (Remote control unit)
2
(Main unit) (Remote control unit)
3
(Main unit) (Remote control unit)
4
(Main unit) (Remote control unit)
If "LFE+Main" is set at "2-2. Subwoofer Setup", "SW:LFE+Main" (see pages 50, 51) is displayed
at the top right of the screen.
NOTES:
• Please set all THX Certified speakers to small and the crossover to 80 Hz.
• We recommend using with the crossover frequency set to "Fixed –THX–", but depending on the speaker, setting it to a different
frequency may improve frequency response near the crossover frequency.
• The crossover frequency mode is valid only when subwoofer is set to ON, and when one or more speakers are set to SMALL, as
described in section "2-1. Speaker Configuration" settings.
Select the "Crossover Frequency" at the Speaker
Setup menu.
* S p e a k e r S e t u p
C r o s s o v e r F r e q .
Display the Crossover Frequency screen.
* C r o s s o v e r F r e q
F i x e d - T H X -
Select the frequency.
Fixed –THX– :
Set to the THX rated 80 Hz crossover frequency.
Variable 40, 60, 80, 90, 100, 110, 120, 150, 200, 250 Hz :
Set as desired according to your speakers' bass playback ability.
Advanced :
The crossover frequency can be set individually for the different speakers. (See page 56)
Enter the setting.
The Speaker Setup menu reappears.
55