Setting The Component In Assignment - Denon AVC-A1XVA Operating Instructions Manual

4-2. Setting the Component In Assignment

• This setting assigns the component video input terminal of the AVC-A1XVA for the different input sources.
1
(Main unit) (Remote control unit)
2
(Main unit) (Remote control unit)
3 Select the component (Y, P
q Select the input source.
(Main unit)
Select from among 1-RCA to 5-RCA and 6-BNC.
Select "NONE" for input sources for which the component (Y, P
It is not possible to select the same component video input jack for different sources.
If the same component video input jack is selected, the setting for the input source that was previously assigned switches to "NONE".
If "Yes" is selected for "Default", the settings are reset to the default values.
4
(Main unit) (Remote control unit)
Select "Component In Assign" at the Video Setup
menu.
* V i d e o S e t u p
C o m p o n e n t I n
Display the Component In Assign screen.
* C o m p o n e n t I n
D V D
/C and P /C ) video input terminal to be assigned to the input source.
B B R R
(Remote control unit)
Enter the setting.
The Video Setup menu reappears.
: 1 R C A
w Select the component video input terminal.
(Main unit)
/C and P /C ) video input is not to be used.
B B R R
(Remote control unit)
71