Setting The Type Of Speakers For Zone2 - Denon AVC-A1XVA Operating Instructions Manual

6-1. Setting the type of speakers for ZONE2

• The composition of the signals output to each channels and the frequency response are adjusted automatically according to the combination of
speakers actually being used in ZONE2.
1
(Main unit) (Remote control unit)
2
(Main unit) (Remote control unit)
3
(Main unit) (Remote control unit)
(Main unit) (Remote control unit)
4
(Main unit) (Remote control unit)
Select "Speaker Config." at the Zone Setup menu.
* Z o n e S e t u p
Z 2 S p C o n f i g .
Display the Speaker Config. screen as below.
Set whether speakers are connected or not in ZONE2 and their size parameters.
Select the speakers connected in ZONE2 and the size parameters.
q Select the speaker.
* Z 2 S p C o n f i g .
F r o n t : S m a l l
w Select the parameter.
For a description of the different parameters,
see page 50.
Enter the setting.
The Zone Setup menu reappears.
ZONE2 Center Sp.
ZONE2 Front Sp.
ZONE2 Subwoofer
ZONE2 Surround Sp.
*
(ZONE2 Surround back Sp.)
*
This is only displayed when "7.1ch" is
selected for the ZONE2 channel output
setting at "7-1. Channel Setup". (See
pages 96 ~ 99)
85