Table of Contents
Advertisement
7 SYSTEM SETUP
• Once all connections with other AV components have been completed as described in "CONNECTIONS" (see pages 10 ~ 23), make the various
settings described below on the monitor screen using the AVC-A1XVA's on screen display function.
These settings are required to set up the listening room's AV system centered around the AVC-A1XVA.
2 Use the following buttons to set up the system
1
Check that the remote control unit set to AMP mode.
2
NOTES:
• The AVC-A1XVA's on screen display function is designed for use with high resolution monitors, so it may be difficult to read small
characters on TVs with small screens or low resolutions.
• The setup menu is not displayed when headphones are being used.
2 System setup items and default values (set upon shipment from the factory)
1. Auto Setup/Room EQ
Auto Setup / Room EQ
This unit performs an analysis of the speaker system and measures
1
Auto Setup
the acoustic characteristics of your room to permit an appropriate
automatic setting.
Room EQ
2
Set the Room EQ setting with All or Assign for each surround mode.
Setup
Direct Mode
Set the ON/OFF setting of Room EQ, in the case of the surround
3
Setup
mode is in Direct or Pure Direct.
Mic Input
Set this to switch the Mic Input jack for use for Mic or V.AUX L-
4
Select
channel input jack.
28
SYSTEM SETUP button
Press this to display the system setup menu.
ENTER button
Press this to switch the display.
Also use this button to complete the setting.
CURSOR buttons
Use these to move the cursors the left, right, up and down on
the screen.
Default settings
All, Room EQ = OFF
–
OFF
Mic
Page
36 ~ 42
43, 44
44
45
Hide quick links:
Advertisement
Table of Contents
