Zone3 And Zone4 Tone Control And Channel Level Setting - Denon AVC-A1XVA Operating Instructions Manual

6-7. ZONE3 and ZONE4 tone control and channel level setting

• Adjust the sound output from ZONE3 and ZONE4.
1
(Main unit)
2
(Main unit)
3
(Main unit)
(Remote control unit)
4
q Select the item to be set.
(Main unit)
Bass : Adjust the tone for the bass.
Treble : Adjust the tone for the treble.
(The bass or treble sound can be adjusted between –12 dB and +12 dB in steps of 2.0 dB.)
HPF : Set this to "ON" if your speakers do not have a very strong capacity for producing low bass. Using the high pass filter
makes it possible to reduce distortion of the bass sound.
Channel Level : Set so that the playback level is the same for the left and right channels.
(The volume can adjusted between –12 dB and +12 dB in steps of 1.0 dB.)
5
(Main unit)
94
Select "Zone3/4 Tone/Ch Lev." at the Zone Setup
menu.
(Remote control unit)
Display the Zone3/4 Tone/Ch Lev. screen.
(Remote control unit)
Select the Zone whose sound you want to adjust.
(ZONE3, ZONE4)
Switch to the setting screen.
(Main unit)
(Remote control unit)
(Remote control unit)
Press the ENTER button to return to the Zone3/4 Tone/Ch Lev. screen.
Use the same procedure to make the settings for ZONE4.
(Remote control unit)
* Z o n e S e t u p
Z o n e 3 / 4
* Z o n e 3 / 4
Z 3 T o n e / C h L e v .
* Z 3 T o n e / C h L e v
B a s s : 0 d B
w Adjust the parameter.
Example: When "Zone3" is selected
(Main unit) (Remote control unit)