Setting The Volume Control - Denon AVC-A1XVA Operating Instructions Manual

7-3. Setting the Volume Control

• Set the upper limit for the volume, the volume level when the power is turned on, and the volume level when the mute mode is set for the
different zones.
1
(Main unit) (Remote control unit)
2
(Main unit) (Remote control unit)
3 Make the volume restriction settings for the different zones.
q Select the desired setting.
(Main unit)
w Select the parameter.
(Main unit)
Volume Limit: Set the upper limit for the volume for the different zones.
–20 dB, –10 dB, 0 dB : The volume cannot be increased above the selected levels.
OFF
Power On Level: Set the volume that is set when the power is turned on for the different zones.
– – – (Mute)
LAST
Mute Level: Set the volume attenuation level when the mute mode is set for the different zones.
FULL
–40 dB
–20 dB
Volume Level: Set whether to fix the output level for the different zones or make it variable.
Variable
–40 dB, 0 dB
NOTES:
• For ZONE2, ZONE3 and ZONE4, the "Volume Limit", "Power On Level" and "Mute Level" can be set when "Variable" is
selected for "Volume Level".
• When the power amplifier is assigned to either of the ZONE2, ZONE3 and ZONE4 channels at "7-2. Power Amp Assign", "-VAR-
" (only variable) is displayed and the fixed level cannot be set.
Select "Volume Control" at the Option Setup menu.
Display the Volume Control screen.
(Remote control unit)
(Remote control unit)
: If you do not want to set a volume limit, select "OFF".
In this case, the volume can be set to the AVC-A1XVA's maximum volume (output) level of +18 dB, which is
extremely loud.
You can adjust the volume level within the range of –80 to +18 dB in steps of 1.0 dB.
: The volume is always muted when the power is turned on.
: The volume set when the AVC-A1XVA was last used is stored in the memory and set when the power is turned
on.
: The volume is fully muted.
: The volume is lowered 40 dB from the current level.
: The volume is lowered 20 dB from the current level.
: The level can be adjusted freely using buttons on the Remote control unit.
: The output level is fixed at the set level and the volume can no longer be adjusted.
* O p t i o n S e t u p
V o l u m e C o n t r o l
* V o l u m e : M a i n
L i m i t : O F F
105