Playing Music Files Stored On The Computer (Music Server) - Denon AVC-A1XVA Operating Instructions Manual

Playing music files stored on the computer (music server)

The necessary system connections and settings must be made in order to play music files.
This procedure is used to play music files (in WMA, MP3 and WAV format) stored on computers (music servers) connected to the AVC-A1XVA via
the network.
The computer's server program must be launched before using this function. For details, refer to the server program's operating instructions.
1 Select the input source to "AUX".
• The "Network Audio" menu screen appears.
(Main unit)
The host names of the computer(s) (music server(s)) on the network are
displayed.
2 Press the cursor up or down button to select the host name of the computer
(music server) on which the music file you want to play is located, then press
the ENTER or cursor right button.
(Remote control unit)
3 Press the cursor up or down button to select the search item or the desired
folder, then press the ENTER or cursor right button.
(Remote control unit)
Playable music files are indicated by the "
4
(Remote control unit)
Press the cursor down button to select the next file, the cursor up button to select the previous file.
During playback, press the ENTER button once to pause playback, then press the ENTER button again to resume playback.
If the ENTER button is pressed and held in for more than 2 seconds when in the play or pause mode, playback stops and the previous
menu screen reappears.
164
(Remote control unit
in the AMP mode)
(Remote control unit)
(Remote control unit)
∗
" mark in front of them.
or
(Remote control unit)
or
or
Press the cursor up or down button to select the music file, then press the ENTER
or cursor right button.
• Connection starts, and playback starts once the buffer reaches "100%".
1
2~4
2~4
1