The Number Of Channels That Can Be Selected; The Subwoofer Output Composition - Denon AVC-A1XVA Operating Instructions Manual

2 The number of channels that can be selected for the different zones is as shown below.
MAIN ZONE
Main
9.1 CH
7.1 CH
5.1 CH
NOTE:
• The channel settings that can be selected for ZONE2 depend on the channel settings for the MAIN ZONE.
2 The subwoofer output composition is as shown below.
Subwoofer
1 SP
2 SP
3 SP
98
Subwoofer
1 SP 5.1 CH / STEREO / MONO
2 SP STEREO / MONO
3 SP STEREO / MONO
1 SP 7.1 CH / 5.1 CH / STEREO / MONO
2 SP 5.1 CH / STEREO / MONO
3 SP 5.1 CH / STEREO / MONO
1 SP 7.1 CH / 5.1 CH / STEREO / MONO
2 SP 7.1 CH / 5.1 CH / STEREO / MONO
3 SP 7.1 CH / 5.1 CH / STEREO / MONO
– Select this when only one subwoofer is connected.
L/R Select this when subwoofers are installed on the left and right.
F/B Select this when subwoofers are installed at the front and rear.
Select this to use the subwoofer for both the main channel's low frequencies and for LFE
LFE/M
low frequencies.
Select this when subwoofers are installed on the left and right and you are using a
L/R/LFE
subwoofer specifically for the LFE.
Select this when subwoofers are installed at the front and rear and you are using a
F/B/LFE
subwoofer specifically for the LFE.
ZONE2
STEREO / MONO
STEREO / MONO
STEREO / MONO
STEREO / MONO
STEREO / MONO
STEREO / MONO
STEREO / MONO
STEREO / MONO
STEREO / MONO
Output Composition
ZONE3 ZONE4
STEREO / MONO
STEREO / MONO
STEREO / MONO
STEREO / MONO
STEREO / MONO
STEREO / MONO
STEREO / MONO
STEREO / MONO
STEREO / MONO