Setting The Type Of Speakers - Denon AVC-A1XVA Operating Instructions Manual

2-1. Setting the type of speakers

• The composition of the signals output to each channels and the frequency response are adjusted automatically according to the combination of
speakers actually being used.
1
(Main unit) (Remote control unit)
2
(Main unit) (Remote control unit)
3
(Main unit) (Remote control unit)
(Main unit) (Remote control unit)
4
(Main unit) (Remote control unit)
NOTE:
• Select "Large" or "Small" not according to the actual size of the speaker but according to the speaker's capacity for playing low frequency
(bass sound below the frequency set for the Crossover Frequency) signals. If you do not know, try comparing the sound at both settings
(setting the volume to a level low enough so as not to damage the speakers) to determine the proper setting.
Select "Speaker Config." at the Speaker Setup
menu.
* S p e a k e r S e t u p
S p e a k e r C o n f i g .
Display the Speaker Config. screen.
Set whether speakers are connected or not and, if so, their size parameters.
q Select the speaker.
* S p e a k e r C o n f i g
F r o n t : S m a l l
w Select the parameter.
Enter the setting.
The Speaker Setup menu reappears.
Center Sp.
Front Sp.
Subwoofer
Surround Sp. A
Surround back Sp.
Surround Sp. B
49